5.2.17 Mirror
When the live view image is the reverse of the actual scene, this funcon helps to display the
image normally.
Select the mirror mode as needed.
Note
The video recording will be shortly interrupted when the funcon is enabled.
5.2.18 Video Standard
Video standard is an ability of a video card or video display device that denes the amount of
colors that are shown and the
resoluon. The two most common video standard used are NTSC
and PAL. In NTSC, 30 frames are transmied each second. Each frame is made up of 525 individual
scan lines. In PAL, 25 frames are
transmied each second. Each frame is made up of 625 individual
scan lines. Select video signal standard according to the video system in your country/region.
5.2.19 Digital Zoom
You can zoom in the image. The larger the zoom size is, the more blurred the image is.
5.2.20 Scene Mode
There are several sets of image parameters predened for dierent installaon environments.
Select a scene according to the actual
installaon environment to speed up the display sengs.
5.2.21 Local Output
Enter a short descripon of your concept here (oponal).
Some camera models support CVBS, SDI, or HDMI output. Set the local output ON or OFF
according to the actual device.This is the start of your concept.
5.3 OSD
You can customize OSD (On-screen Display) informaon such as device name, me/date, font,
color, and text overlay displayed on video stream.
Go to OSD
seng page: Conguraon → Image → OSD Sengs . Set the corresponding
parameters, and click Save to take
eect.
Select a channel.
Thermal Opcal Bi-spectrum Network Camera User Manual
33
To Next Page
Loading...
Need help?
General
