HIKVISION DS-2TD2637T-7/P

Manual
You can drag the slider or set value to adjust the brightness.
Note
The funcon varies according to device models.
5.2.6 BLC
If you focus on an object against strong backlight, the object will be too dark to be seen clearly. BLC
(backlight
compensaon) compensates light to the object in the front to make it clear. If BLC mode
is set as Custom, you can draw a red rectangle on the live view image as the BLC area.
5.2.7 WDR
The WDR (Wide Dynamic Range) funcon helps the camera provide clear images in environment
with strong illuminaon dierences.
When there are both very bright and very dark areas simultaneously in the eld of view, you can
enable the WDR funcon and set the level. WDR automacally balances the brightness level of the
whole image and provides clear images with more details.
Note
When WDR is enabled, some other funcons may be not supported. Refer to the actual interface
for details.
Figure 5-2 WDR
5.2.8 White Balance
White balance is the white rendion funcon of the camera. It is used to adjust the color
temperature according to the environment.
Thermal Opcal Bi-spectrum Network Camera User Manual
29