HIKVISION DS-3E1526P - Port Rate-Limiting

Parameter Descripon
You can only set one port as the mirror port.
Mirror Source The port that is under surveillance.
You can set one or more ports as the mirror source.
Mirror Direcon Surveillance direcon.
• Disable Mirror: The port is not under surveillance.
• Inbound: The inbound data of the port is under
surveillance.
• Outbound: The outbound data of the port is under
surveillance.
• Inbound and Outbound: Both inbound and
outbound data of the port are under surveillance.
4. Click Save to complete the port mirroring conguraon.
4.1.3 Port
Rate-Liming
Congure the port sending and receiving rate according to the actual situaon.
Steps
1. Go to Switch
Conguraon → Basic Conguraon → Port Conguraon → Port Rate-Liming .
Figure 4-3 Port Rate-Liming
2. Congure the parameters.
Gigabit PoE Switch Web User Manual
9