HIKVISION DS-3E1526P - Page 7

• Keep body parts away from fan blades. Disconnect the power source during servicing.
• Never place the device in an unstable
locaon. The device may fall, causing serious personal
injury or death.
• This device is not suitable for use in
locaons where children are likely to be present.
• CAUTION: Risk of explosion if the
baery is replaced by an incorrect type.
• Improper replacement of the
baery with an incorrect type may defeat a safeguard (for
example, in the case of some lithium baery types).
• Do not dispose of the
baery into re or a hot oven, or mechanically crush or cut the baery,
which may result in an explosion.
• Do not leave the baery in an extremely high temperature surrounding environment, which may
result in an explosion or the leakage of ammable liquid or gas.
• Do not subject the
baery to extremely low air pressure, which may result in an explosion or the
leakage of ammable liquid or gas. Dispose of used baeries according to the instrucons.
Cauon
• CAUTION: Double pole/Neutral fusing.
Aer operaon of the fuse, parts of the device that
remain energized might represent a hazard during servicing.
• The device has been designed, when required, modied for connecon to an IT power
distribuon system.
• This device is suitable for
mounng on concrete or other non-combusble surface only.
• The
venlaon should not be impeded by covering the venlaon openings with items, such as
newspapers, table-cloths, curtains, etc. The openings shall never be blocked by placing the
device on a bed, sofa, rug or other similar surface.
• No naked
ame sources, such as lighted candles, should be placed on the device.
• The device shall not be exposed to dripping or splashing and that no objects lled with liquids,
such as vases, shall be placed on the device.
• Burned
ngers when handling the cover area of the device. Wait one-half hour aer switching
o before handling the parts.
• CLASS 1 LASER PRODUCT
Gigabit PoE Switch Web User Manual
vi