190
User Manual of Digital Video Recorder
12.6 Restoring Default Settings
Steps:
1.
Enter the Default interface.
Menu > Maintenance > Default
Figure 12. 9 Restore Defaults
2.
Select the restoring type from the following three options.
Restore Defaults:
Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the factory
default settings.
Factory Defaults:
Restore all parameters to the factory default settings.
Restore to Inactive:
Restore the device to the inactive status.
3.
Click the
OK
button to restore the default settings.
The device will reboot automatically after restoring to the default settings.
To Next Page
Loading...
