HIKVISION DS-7100HGHI-K1/R Series - Page 61

Figure 6-9 Add IP Camera
3. Enter informaon of the network camera to add.
Use Channel Default Password
If it is checked, the video recorder will add the camera by the set channel default password.
4. Click Add.
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Steps
1. Go to Conguraon → Camera → IP Camera .
2. Click
of an added network camera.
Channel Port
If the connected device is an encoding device with mulple channels, you can choose the
channel to connect by
selecng the channel port No. in the drop-down list.
Digital Video Recorder User Manual
47