HIKVISION DS-7100HGHI-K1/R Series - Page 62

3. Click OK.
Example
Enter an example that illustrates the current task
(oponal).
What to do next
Enter the tasks the user should do aer nishing this task (oponal).
Import/Export IP Camera Conguraon File
The informaon of added network camera can be generated into an excel le and exported to the
local device for backup, including the IP address, manage port, password of admin, etc. And the
exported
le can be edited on your computer, like adding or deleng the content, and copy the
seng to other devices by imporng the excel le to it.
Before You Start
Connect a backup device like USB
ash drive to your video recorder.
Steps
1. Go to Conguraon → Camera → IP Camera .
2. Click
3. Click Export to export conguraon les to the connected backup device.
4. To import a conguraon le, select the le from the selected backup device and click Import.
Aer the imporng process is completed, you must reboot the video recorder.
Advanced
Sengs
Steps
1. Go to
Conguraon → Camera → IP Camera .
2. Click .
3.
Congure the parameters as your desire.
H.265 Auto Switch Conguraon
If you enable the opon, video recorder will automacally switch to H.265 stream for the
network camera (which supports H.265 video format) for the
inial access.
Upgrade
Upgrade the added network cameras.
Channel Default Password Management
Change the default password of acvang and adding network camera.
Digital Video Recorder User Manual
48