HIKVISION DS-7100HGHI-K1/R Series - Page 66

Figure 6-12 Moon Detecon
2. Select Camera to congure.
3. Check Enable.
4. Set the moon detecon area. Choose from:
-
Full screen: Click Full Screen to set the moon detecon area as full screen.
-
Customized area: Drag on the preview window to draw
moon detecon areas.
-
Clear: Click Clear to clear the current moon detecon areas.
5. Adjust Sensivity as your desire.
Sensivity
It allows you to calibrate how readily movement triggers the alarm. A higher value results in
the more readily to triggers moon detecon.
6. Check False Alarm Filter. Then only when both the moon detecon and PIR events are
triggered, the moon detecon alarm will be triggered.
Note
The opon is only available for PIR camera.
7. Set the arming schedule.
8. Set the linkage acons.
9. Click Apply.
Video Tampering
Trigger alarm when the lens is covered and take alarm response acons.
Steps
1. Go to Conguraon → Event → Normal Event → Video Tampering Detecon .
Digital Video Recorder User Manual
52