HIKVISION DS-7100HGHI-K1/R Series - Page 69

Figure 6-15 Edit Alarm Input
3. Customize Alarm Name.
4. Select alarm Type as N.O (normally open) or N.C (normally closed).
5. Select
Sengs as Input to enable the funcon.
6. Set the arming schedule.
7. Set the linkage acons.
8. Click Apply.
Alarm Output
Trigger an alarm output when an alarm is triggered.
Steps
1. Go to Conguraon → Event → Normal Event → Alarm Output .
2. Click
of a desired alarm output.
3. Customize Alarm Name.
4. Select Dwell Time.
Digital Video Recorder User Manual
55