HIKVISION DS-7100HGHI-K1/R Series - Page 70

Figure 6-16 Alarm Output
5. Select Sengs as Input to enable the funcon.
6. Set the arming schedule.
7. Click Apply.
Excepon
Excepon events can be congured to take the event hint in the live view window and trigger
alarm outputs and linkage
acons.
Steps
1. Go to Conguraon → Event → Normal Event → Excepon .
2. Congure event hint. When the set events occur, you will receive hints in alarm center.
1) Check Event Hint.
2) Select events to hint.Choose from:
• Click
of Event Hint Conguraon to select events.
• Click in the upper-right corner of local menu to enter alarm center to select events.
3. Select
Excepon Type to set its linkage acons.
Digital Video Recorder User Manual
56