•
Sensivity: Range [0-100]. The higher the value is, the more easily the detecon alarm can
be triggered.
• Threshold: Range[1s-10s]. It denesthe me of the object loitering in the region. If you set
the value as 5, alarm is triggered aer the object loitering in the region for 5s; and if you
set the value as 0, alarm is triggered immediately
aer the object entering the region.
6. Set the arming schedule.
7. Set the linkage
acons.
8. Click Apply.
People Gathering Detecon
People gathering detecon alarm is triggered when people gather around in a pre-dened virtual
region, and a series of acons can be taken when the alarm is triggered.
Steps
1. Go to
Conguraon → Event → Smart Event → People Gathering .
2. Select Camera to congure.
3. Check Enable People Gathering Detecon.
4. Check Save VCA Picture to save the captured pictures of VCA detecon.
5. Set the detecon rules and detecon areas.
1) Select Arming Area. Up to 4 arming areas are selectable.
2) Adjust Percentage. Percentage
denes the gathering density of the people in the region.
Usually, when the percentage is small, the alarm can be triggered when small number of
people gathered in the
dened detecon region.
3) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes
of the detecon region.
6. Set the arming schedule.
7. Set the linkage
acons.
8. Click Apply.
Fast Moving
Detecon
Fast moving detecon alarm is triggered when people, vehicle or other objects move fast in a pre-
dened
virtual region, and a series of acons can be taken when the alarm is triggered.
Steps
1. Go to Conguraon → Event → Smart Event → Fast Moving .
2. Select Camera to congure.
3. Check Enable Fast Moving Detecon.
4. Check Save VCA Picture to save the captured pictures of VCA detecon.
5. Set the detecon rules and detecon areas.
1) Select Arming Area. Up to 4 arming areas are selectable.
2) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes
of the
detecon region.
Digital Video Recorder User Manual
61