HIKVISION DS-7100HGHI-K1/R Series - Page 77

• Time Threshold
denes the me of the vehicle parking in the region. If you set the value
as 10, alarm is triggered aer the vehicle stay in the region for 10s.
• Sensivity:The size of the object that can trigger the alarm. The higher the value is, the
more easily the detecon alarm will be triggered. Its range is [1-100].
3) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes
of the
detecon region.
6. Set the arming schedule.
7. Set the linkage
acons.
8. Click Apply.
Object Removal Detecon
Object removal detecon funcon detects the objects removed from the pre-dened region, such
as the exhibits on display, and a series of acons can be taken when the alarm is triggered.
Steps
1. Go to
Conguraon → Event → Smart Event → Object Removal .
2. Select Camera to congure.
3. Check Enable Object Removal Detecon.
4. Check Save VCA Picture to save the captured pictures of VCA
detecon.
5. Set the detecon rules and detecon areas.
1) Select Arming Area. Up to 4 arming areas are selectable.
2) Set
Sensivity and Time Threshold.
• Time Threshold range: [5s-3600s]. It
denes the me of the objects removed from the
region. If you set the value as 10, alarm is triggered aer the object disappears from the
region for 10s.
•
Sensivitydenes the similarity degree of the background image. Usually, when the
sensivity is high, a very small object taken from the region can trigger the alarm.
3) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes
of the
detecon region.
6. Set the arming schedule.
7. Set the linkage
acons.
8. Click Apply.
Audio
Excepon
Enter a short descripon of your task here (oponal).
Before You Start
Enter the prerequisites here (oponal).
Enter the context of your task here (oponal).
Steps
1. Enter your
rst step here.
Digital Video Recorder User Manual
63