HIKVISION DS-7100HGHI-K1/R Series - Page 81

Congure Audio Warning
The audio warning enables the video recorder to trigger an audible beep when an alarm is
detected.
Steps
1. Go to
Conguraon → System → Live View → General .
2. Enable Audio Output and set Volume.
3. Go to Linkage
Acon interface of the alarm detecon.
4. Select Audio Warning alarm linkage acon.
Nofy
Surveillance Center
The video recorder can send an excepon or alarm signal to the remote alarm host when an event
occurs. The alarm host refers to the computer installed with client soware (e.g., iVMS-4200,
iVMS-5200).
Steps
1. Log into video recorder in web browser.
2. Go to
Conguraon → Network → Advanced Sengs → Other .
3. Set Alarm Host IP and Alarm Host Port.
4. In local menu, go to Linkage
Acon interface of the alarm detecon.
5. Select Nofy Surveillance Center.
Congure
Email Linkage
The video recorder can send an email with alarm informaon to a user or users when an alarm is
detected.
Steps
1. Switch to easy mode.
2. Go to
Conguraon → System → Network → Email .
3. Congure the Email sengs.
4. Go to Linkage Acon interface of the alarm detecon.
5. Select Send Email alarm linkage acon.
Trigger Alarm Output
The alarm output can be triggered by the normal and smart events.
Steps
1. Go to Linkage Acon interface of the alarm input or event detecon.
2. Click Trigger Alarm Output.
3. Select the alarm outputs to trigger.
Digital Video Recorder User Manual
67