Need help?Do you have a question about the HIKVISION DS-7104NI-SL/W and is the answer not in the manual?
General| Model | DS-7104NI-SL/W |
|---|---|
| Category | Network Video Recorder |
| Channel Input | 4 |
| VGA Output Resolution | 1920 x 1080 |
| Two-way Audio | Yes |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Decoding format | H.265/H.264 |
| Synchronous Playback | 4-ch |
| Max Outgoing Bandwidth | 40 Mbps |
| HDD Bays | 1 |
| Max HDD Capacity | 6TB |
| Storage Capacity | Up to 6TB |
| Power Supply | 12V DC |
| Consumption(without hard disk) | ≤ 10W |
| Power Consumption | ≤ 10W |
| Working Humidity | 10% to 90% |
| Operating Humidity | 10% to 90% |
| Video Input | 4 x IP camera |
| Video Output | 1 x HDMI, 1 x VGA |
| HDMI Output Resolution | 1920x1080 |
| Audio Input | 1 x RCA |
| Audio Output | 1 x RCA |
| Resolution | 6MP/5MP/4MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| Live view / Playback resolution | 6MP/5MP/4MP/3MP/1080P/UXGA/720P/VGA/4CIF/DCIF/2CIF/CIF/QCIF |
| Hard disk | SATA |
| Network Interface | 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface |
| USB Interface | 2 x USB 2.0 |
| Wireless Network | No |
| Working Temperature | -10°C to +55°C |
| Operating Temperature | -10°C to +55°C |
Describes the buttons and interfaces on the front panel of the NVR.
Explains how to use the infrared remote control for device operation.
Details how to use a USB mouse for NVR interaction and control.
Explains the on-screen keyboard and input methods.
Details the connectors and ports located on the rear panel of the NVR.
Provides instructions on how to properly start up and shut down the NVR device.
Guides users through setting an initial administrator password for device activation.
Explains how to use the setup wizard for initial NVR configuration.
Details the procedures for logging into and out of the NVR system.
Covers the process of adding and connecting IP cameras to the NVR.
Introduces the live view function, showing real-time video from cameras.
Explains various operations and functions available within the live view mode.
Details how to customize live view settings like output interface and dwell time.
Describes the process for logging out of the NVR system.
Guides users on setting up PTZ parameters for camera control.
Explains how to set and manage PTZ presets, patrols, and patterns.
Describes the PTZ control panel interface and its icons for camera manipulation.
Details how to configure recording parameters affecting image quality and stream type.
Explains how to set a schedule for automatic camera recording.
Guides on setting up motion detection to trigger recording or other actions.
Describes how to configure recording triggered by external alarm inputs.
Explains how to set up recording triggered by Video Content Analysis (VCA) alarms.
Details how to manually start and stop recording sessions.
Allows setting different recording schedules for holidays.
Explains how to set up redundant recording for enhanced data safety and reliability.
Covers grouping HDDs for organized storage of recorded files.
Describes methods to protect recorded files from overwriting.
Details how to play back recorded video files using various search methods.
Describes additional playback features like frame-by-frame and digital zoom.
Explains methods for backing up recorded video files.
Covers management of backup devices like USB drives and writers.
Configures motion detection parameters and alarm response actions.
Details how to configure handling actions for external sensor alarms.
Sets up detection and response actions for video loss events.
Configures detection and response for video tampering events.
Guides on setting up Video Content Analysis (VCA) alarms and response actions.
Configures actions for various system exceptions like HDD full or network errors.
Defines how the system responds to alarms, including event hints and full-screen monitoring.
Explains how to manually trigger or clear alarm outputs.
Sets basic network parameters like IP address, subnet mask, and gateway.
Configures advanced network features including EZVIZ Cloud P2P, DDNS, and PPPoE.
Allows monitoring of real-time network traffic and connection status.
Provides tools to test network delay, packet loss, and export network packets.
Guides on initializing newly installed Hard Disk Drives for NVR use.
Details how to add and manage NAS or IP SAN disks as network HDDs.
Explains how to manage HDDs by grouping them for recording.
Allows setting allocated storage quotas for recorded files per camera.
Describes how to check the status of installed HDDs for potential failures.
Covers HDD detection functions like S.M.A.R.T. and bad sector detection.
Sets up alarms for HDD errors or abnormal status.
Allows configuration of On-Screen Display settings like date, time, and camera name.
Details setting up privacy mask zones to obscure specific areas in the video feed.
Explains how to adjust video parameters such as brightness, contrast, and saturation.
Describes how to view system and device information for monitoring.
Covers searching, viewing, and exporting system log files.
Details importing and exporting IP camera configuration data.
Explains how to backup and restore NVR configuration files.
Provides instructions for upgrading the NVR system firmware.
Guides on restoring the NVR to its factory default settings.
Details how to configure the RS-232 serial port for device communication.
Configures general device settings like language, resolution, and date/time.
Allows configuration of Daylight Saving Time (DST) settings for the device.
Adjusts additional device parameters like name, number, and auto logout settings.
Covers managing user accounts, adding, deleting, and editing permissions.
Provides definitions for technical terms used in the manual.
Offers solutions for common issues encountered with the NVR.
Lists updates and changes made across different software versions.
Lists IP cameras compatible with the NVR for seamless integration.
Lists compatible Hikvision IP camera models.
Lists compatible third-party IP cameras.
To Next Page
