All-in-One Network Video Recorder Quick Start Guide
23
Accessing by Web Browser
Logging in
You can get access to the device via web browser. You may use one of the following listed web browsers: Internet
Explorer 6.0, Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Internet Explorer 10.0, Apple
Safari, Mozilla Firefox, and Google Chrome. The supported resolutions include 1024*768 and above.
Before you start:
Ensure the PC and NVR are in the same network segment.
Steps:
1. Open web browser, input the IP address of the device and then press Enter.
2. Login to the device.
If the device has not been activated, you need to activate the device first before login.
1) Set the password for the admin user account.
2) Click OK to login to the device.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password
of your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
If the device is already activated, enter the user name and password in the login interface, and click the
Login button.
3. Install the plug-in before viewing the live video and managing the camera. Please follow the installation
prompts to install the plug-in.
To Next Page
Loading...
Need help?
General
