Network Video Recorder User Manual
150
11.2 Configuring Wi-Fi Settings
Purpose:
The device can work as a wireless network router. Follow the steps to setup a network router.
Step 1 Enter WiFi interface
Menu > Configuration > WiFi
Figure 11-2 Wi-Fi Settings
Step 2 Configure wireless network parameters, including Network Bridging, SSID, Security Mode,
and Key.
Network Bridging: Enable device to create a single aggregate network from multiple
communication networks or network segments
SSID: It is the short for Service Set Identifier. SSID is the WiFi name that the device provides.
Area/Country: Select where the router is used.
Channel: Select the best channel according to your situation.
Security Mode: Select the security protocol for the wireless network.
Encryption Type: It is used to protect information. TKIP and AES are selectable.
Key: Enter the encryption key.
WPS: It is the short of Wi-Fi Protected Setup. Click the button and then you can connect the
wireless network without password for once.
Step 3 Click Apply to save the settings.
To Next Page
Loading...
