HIKVISION DS-7804N-K1/W - Using the Unlock Pattern for Login

Network Video Recorder User Manual
26
Step 4 Insert the U flash disk to your device, and export the GUID file to the U flash disk in the Reset
Password interface. Please refer to Chapter2.1.5 Resetting Your Password for the
instructions of password resetting.
Figure 2-4 Export GUID File

Please keep your GUID file properly for future password resetting.

If Admin’s password is modified, the following menu pops up. Optionally, click the Yes
button to duplicate the password to IP cameras that are connected with default protocol.
Figure 2-5 Attention Interface
2.1.3 Using the Unlock Pattern for Login
For the Admin user, you can configure the unlock pattern for device login.
Configuring the Unlock Pattern
Step 1 After the device is activated, you can enter the following interface to configure the device
unlock pattern.