HIKVISION DS-7804N-K1/W - Chapter 15 Others; Configuring General Settings

Network Video Recorder User Manual
191
Chapter 15 Others
15.1 Configuring General Settings
Purpose:
You can configure the VGA/HDMI output resolution, mouse pointer speed through the Menu >
Configuration > General interface.
Step 1 Enter the General Settings interface.
Menu > Configuration > General
Step 2 Select the General tab.
Figure 15-1 General Settings Interface
Step 3 Configure the following settings:
 Language: The default language used is English.
 Output Standard: Select the output standard to NTSC or PAL, which must be the same with
the video input standard.
 Resolution: Configure the VGA/HDMI resolution.
 Time Zone: Select the time zone.
 Date Format: Select the date format.
 System Date: Select the system date.
 System Time: Select the system time.
 Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
 Enable Wizard: Enable/disable the Wizard when the device starts up.
 Enable Password: Enable/disable the use of the login password.