Network Video Recorder User Manual
194
15.3 Configuring More Settings
Step 1 Enter the General Settings interface.
Menu > Configuration > General
Step 2 Click the More Settings tab to enter the More Settings interface.
Figure 15-3 More Settings Interface
Step 3 Configure the following settings:
Device Name: Edit the name of NVR.
Device No.: Edit the serial number of NVR. The Device No. can be set in the range of 1~255,
and the default No. is 255. The number is used for the remote and keyboard control.
Auto Log out: Set timeout time for menu inactivity. E.g., when the timeout time is set to 5
Minutes, then the system will exit from the current operation menu to live view screen after 5
minutes of menu inactivity.
Menu Output Mode: You can choose the menu display on different video output.
Step 4 Click the Apply button to save the settings.
To Next Page
Loading...
