Network Video Recorder User Manual
32
2.2 Using Wizard for Basic Configuration
By default, the Setup Wizard starts once the NVR has loaded, as shown in Figure 2-15.
Figure 2-15 Start Wizard Interface
Operating the Setup Wizard:
The Setup Wizard can walk you through some important settings of the NVR. If you don’t
want to use the Setup Wizard at that moment, click the Cancel button. You can also choose
to use the Setup Wizard next time by leaving the “Start wizard when the device starts?”
checkbox checked.
Step 1 Click Next button to enter the date and time settings page.
Figure 2-16 Date and Time Settings
Step 2 Click Next to enter wireless network settings page.
To Next Page
Loading...
