Network Video Recorder User Manual
121
Chapter 12 VCA Event Alarm
The device supports receiving the VCA detections sent by connected IP cameras. Enable and
configure the VCA detection on the IP camera settings interface first.
VCA detections must be supported by the connected IP camera.
Refer to the User Manual of Network Camera for the detailed instructions for the VCA
detection.
Face Detection
Purpose:
Face detection function detects the face appears in the surveillance scene. Linkage actions will
be triggered when a human face is detected.
Go to System > Event > Smart Event.
Select a camera to configure.
Click Face Detection.
Face Detection
To Next Page
Loading...
