Network Video Recorder User Manual
42
Configure Privacy Mask
Purpose:
The privacy mask can be used to protect personal privacy by concealing parts of the image from
view or recording with a masked area.
Go to Camera >Privacy Mask.
Select the camera to set privacy mask.
Click the checkbox of Enable to enable this feature.
Use the mouse to draw a zone on the window. The zones will be marked with different frame
colors.
Privacy Mask Settings Interface
Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.
Related Operation:
The configured privacy mask zones on the window can be cleared by clicking the corresponding
Clear Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
Click Apply to save the settings.
To Next Page
Loading...
