Network Video Recorder User Manual
37
Chapter 3 Camera Management
Add the IP Cameras
Add the IP Camera Manually
Purpose:
Before you can get live video or record the video files, you should add the network cameras to
the connection list of the device.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been
activated.
Click on the main menu bar to enter the Camera Management.
Click the Custom Add tab on the title bar or click in the idle channel window to enter the
Add IP Camera interface.
Enter IP address, protocol, management port, and other information of the IP camera to add.
Enter the login user name and password of the IP camera.
Add IP Camera
Click Add to finish the adding of the IP camera.
To Next Page
Loading...
Need help?
General
