HIKVISION DS-96064NI-I16 User Manual

Network Video Recorder User Manual
162
Restore Default Settings
Go to Maintenance > Default.
Restore Defaults
Select the restoring type from the following three options.
Restore Defaults: Restore all parameters, except the network (including IP address, subnet
mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account
parameters, to the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to the inactive status.
The device will reboot automatically after restoring to the default settings.
System Service
Network Security Settings
HTTP
You can choose to disable the HTTP, or set the HTTP authentication when it is enabled as
demand to enhance the access security.
By default, the HTTP service is enabled.
Setting HTTP Authentication
Purpose

HIKVISION DS-96064NI-I16 Specifications

General

Brand	HIKVISION
Model	DS-96064NI-I16
Category	Network Hardware
Language	English