Fingerprint Time Attendance Terminal
46
The interface is divided into 2 parts: device management and online device
detection.
Device Management:
Manage the access control devices, including adding, editing, deleting, and batch
time synchronizing functions.
Online Device Detection:
Automatically detect online devices in the same subnet with the access control
server, and the detected devices can be added to the server in an easy way.
Note: The control client can manage 16 access controllers at most.
Device Management
Adding Controller
Steps:
1. Click the button to enter the add access controller interface.
2. Input the device name.
3. Select the access controller type in the dropdown list.
4. Select the connection mode in the dropdown list: TCP/IP, or COM port.
TCP/IP: Connect the device via the network.
5. Set the parameters of connecting the device.
If you choose to connect the device via network, you should input the IP address
and port No. of the device, and set the Dial-up value to 1.
6. Click the button to finish adding.
You can click Status to check the detailed status of the controller, and click Remote
Configuration to configure the settings of the controller.
Editing Device (Basic Information)
Purpose:
To Next Page
Loading...
Need help?
General
