Video Access Control Terminal·User Manual
125
Print Captured Picture: Capture a picture and print it.
Send Email: Capture the current picture and then send an Email
notification to one or more receivers. The captured picture can
be attached.
Custom Capture: Capture the current picture. You can edit its
name and then save it.
Start/Stop the manual recording. The video file is stored in the
PC.
Download the video files of the camera and the video files are
stored in the PC. You can select to download by file or by date.
Click to enable/disable the audio in playback.
Enter the fisheye playback mode.
Display the playback in full-screen mode. Click the icon again or
press Esc key to exit.
Downloading Video Files
During playback, you can click on the toolbar to download the video files of the camera to the
local PC. You can select to download by file, by date, or by tag.
Download by Files
Steps:
1. Click Download by Files tab in the File Download interface. You can view the video files
information of selected camera.
2. Check the checkbox of the video file and the total size of the selected files will be shown below.
3. Click Download to start downloading the file to the local PC.
You can input the flow (0 to 32768 kbps) and click Set to control the downloading speed.
4. Optionally, you can click Stop to stop downloading manually.
To Next Page
Loading...
