HIKVISION DS-K1T6QT-F43 Series - Set DST

Figure 9-3 Time Sengs
Click Save to save the sengs aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check Sync. with Computer Time to synchronize the device me with the
computer's
me.
9.6.4 Set DST
Steps
1.
Click
Conguraon → System → System Sengs → DST .
DS-K1T6QT-F43 Series Face Recognion Terminal User Manual
102