HIKVISION DS-K1T6QT-F43 Series

Set the matching threshold when authencang via ECO mode 1:N matching mode. The larger
the value, the smaller the false accept rate and the larger the false rejecon rate. The maximum
value is 100.
Set Recognion Area
Tap Conguraon → Smart → Area Conguraon to enter the page.
Drag the blue frame in the live video to adjust the recognion area. Only the face within the area
can be recognized by the system.
Drag the slider to
congure the eecve area of face recognion.
Tap Save to save the sengs.
8.4.7 Video Intercom
Sengs
Set Device ID
The device can be used as a door staon, outer door staon, or access control device. You should
set the device ID before usage.
Device ID
Sengs
Tap Conguraon → Intercom → Device ID Sengs .
If you set the device type as Door Staon or Access Control Device, you can set the oor No. and
door
staon No.
Tap Save to save the sengs aer the conguraon.
DS-K1T6QT-F43 Series Face Recognion Terminal User Manual
88