HIKVISION DS-K1T6QT-F43 Series

Press Buon to Call
Steps
1.
Click Intercom → Press
Buon to Call to enter the sengs page.
2.
Set the parameters.
-
Edit call No. for every
buon.
-
Check Call Management Center to set the buon calling center.
Note
If you check Call Management Center and set the call No. as well, call management center has
higher privilege than call No.
9.6.21 Access Control Sengs
Set Door Parameters
Click Conguraon → Access Control → Door Parameters .
Figure 9-13 Door Parameters Sengs Page
Click Save to save the sengs aer the conguraon.
Door No.
Select the device corresponded door No.
Name
You can create a name for the door.
Open Duraon
Set the door unlocking duraon. If the door is not opened for the set me, the door will be
locked.
Door Open Timeout Alarm
DS-K1T6QT-F43 Series Face Recognion Terminal User Manual
128