Fingerprint Access Control Terminal·User Manual
116
The client software gives an audible warning when alarm is
triggered. You can select the alarm sound for audible warning.
Send an email notification of the alarm information to one or
more receivers.
Display the alarm information on the E-map.
Note: This linkage is only available to access control point and
alarm input.
Alarm Triggered
Pop-up Image
The image with alarm information pops up when alarm is
triggered.
5.11.4 Event Card Linkage
Click Event Card Linkage tab to enter the following interface.
Note: The Event Card Linkage should be supported by the device.
Select the access control device from the list on the left.
Click Add button to add a new linkage. You can select the event source as Event Linkage or Card
Linkage.
Event Linkage
For the event linkage, the alarm event can be divided into four types: device event, alarm input,
door event, and card reader event.
Steps:
To Next Page
Loading...
