Fingerprint Access Control Terminal·User Manual
44
2. Select Edit and follow the steps in Section 0 Adding Holiday to edit the holiday information.
Or select Delete and press the OK key to delete the holiday.
3. Press the ESC key and select Yes to save the settings and exit the interface.
4.6.4 Configuring Shift Schedule
Purpose:
Configure the shift schedule by department or by individual.
Scheduling Shift by Department
Before you start:
1. Edit the department. For detailed information, see Section 4.6.1 Configuring Department.
2. Configure the normal shift or the man-hour shift. For detailed information, see Section 4.6.2
Configuring Shift.
Steps:
1. Select a target department in the By Dept. (Schedule by Department) interface.
2. Press the OK key to enter the Schedule Shift by Dept. interface.
To Next Page
Loading...
