Fingerprint Access Control Terminal·User Manual
51
2. Press the key to enter the Import interface and select Import ACS Para (Import Access Control
System Parameters).
3. Press the OK key to import.
Notes:
Support the USB disk of FAT32 format.
The file for importing should be in the root directory.
4.7.2 Searching Log
Purpose:
You are able to search the event log in the target time duration of the target ID No.
Steps:
1. Enter the ID No. in the Log (Log Search) interface.
2. Move the cursor the Name, the corresponding name will be displayed automatically.
Or enter the name and move the cursor to the ID No., the corresponding ID No. will be displayed
automatically.
3. Enter the target log start time and the end time.
To Next Page
Loading...
