Fingerprint Access Control Terminal·User Manual
33
2. Edit the holiday group name.
Or select New ACS Holiday to add new holiday schedules.
3. Press the ESC key and select Yes to save the settings and exit the interface.
Or
1) Select a holiday in the holiday list and select Edit in the Holiday Settings interface.
Or seslect Delete to delete the select holiday.
2) Edit the select holiday according to Section 0 Adding Holiday Group.
3) Press the ESC key and select Yes to save the settings and exit the interface.
4.5.3 Configuring Week Plan
Adding Week Plan
Steps:
1. Select Week Plan and press the OK key to enter the Week Plan list interface.
Note: By default, the system contains one week plan, named Week Plan 1.
To Next Page
Loading...
