Fingerprint Access Control Terminal·User Manual
42
The following steps will take Custom 1 as an example.
3. Press the OK key to enter the Man-Hour Shift configuration interface.
4. Select Edit to enter the Edit Shift interface.
You can edit the shift name, the shift duration, the latest time on-work and the break time.
Notes:
The shift No. cannot be edited.
The break time will not be counted into the working hour.
If set the Latest Time (On-Work) to 0, the function is disabled by default.
You can also select Reset and press the OK key to reset the settings.
5. Press the ESC key and select Yes to save the settings and exit the interface.
4.6.3 Configuring Holiday
Purpose:
Configure the attendance holiday. The device will not take attendance during the holiday.
Adding Holiday
Steps:
To Next Page
Loading...
