Fingerprint Access Control Terminal·User Manual
69
Notes:
The device user name is admin by default.
The device password is created when you activate the device. For details, refer to Chapter
4.1 Device Activation.
8. (Optional) Check the Export to Group checkbox to create a group by the device name.
You can import all the channels of the device to the corresponding group by default.
9. Click Add to add the device to the local client.
Adding Devices by EHome Account
Purpose:
You can add access control device connected via EHome protocol by inputting the EHome account.
Before you start: Set the network center parameter first. For details, refer to Chapter 5.4.4
Network Settings.
Steps:
1. Click Add to open the device adding dialog box.
2. Select EHome as the adding mode.
To Next Page
Loading...
