Video Intercom Door Station·User Manual
81
Figure 9-22 Modifying Device Information
3. Click OK to complete the device modifying operation.
Deleting Device
1. Select an added device.
2. Click Remove to pop up a dialog box.
Figure 9-23 Information
3. Click OK to complete the group deleting operation.
9.6.2 Video Intercom
Receiving Call from Door Station
Purpose:
When the door station has been added to the client software, you can call iVMS-4200
via door station.
Before you start:
Make sure the door station has been added to the iVMS-4200 client software.
Make sure the SIP server IP address of the door station is not configured (or
abnormal).
Steps:
Press Calling Center key on the door station.
To Next Page
Loading...
