4.
Congure the indoor staon.
1) Select Device Type as Indoor Staon or Indoor Extension.
2) Set Floor No..
3) Set Room No..
4) Congure advanced sengs. Set Comminity No., Building No. and Unit No.
5) Set
Registraon Password.
6) Tap Next.
Figure 7-4 Indoor Staon Sengs
5.
Enable the Wi-Fi funcon. Select a Wi-Fi from the list and enter the Wi-Fi's password to get
connected. Tap Next.
Note
The device should support Wi-Fi.
Video Intercom Kit User Manual
19