HIKVISION DS-KH6320-WTDE1 User Manual

Appendix A. Cables
Cables and Wiring
●
When there are mulple cores in one parallel line, only one pair of closed cores are allowed to
transmit signal. It is not allowed to use
mulple pair of cores in one cable to transmit signal.
●
When using parallel lines, it is suggested to use those with shielding layer. If dual core or
mulple
core parallel lines without shielding layer are routed, stability of signal transmission can be
eected. You need to run a test before installaon.
●
Impedance of cable should not be over suggested value, or distributor cannot transmit enough
power to indoor staon or door staon.
●
Strong electricity and weak electricity cannot be wired in the same route, they need to be wired
separately and the distance should be more than 0.5 meter.
●
All the cables used need to follow the restricon in the following table.
Table A-1 Wiring Cables
RVV4 Cable Specicaon Transmission Distance (TD)
RVV4 (0.2 mm
2
) Transmission Distance ≤ 10 m
RVV4 (0.5 mm
2
) 10 m < Transmission Distance ≤ 30 m
RVV4 (0.75 mm
2
) 30 m < Transmission Distance ≤ 50 m
RVV4 (1.5 mm
2
) 50 m < Transmission Distance ≤ 100 m
Video Intercom Kit User Manual
56

HIKVISION DS-KH6320-WTDE1 Specifications

General

Brand	HIKVISION
Model	DS-KH6320-WTDE1
Category	Intercom System
Language	English