HIKVISION DS-KH6320-WTDE1 - 7.1.3 Password Settings

2.
Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
3.
Arm the selected zone.
Note
●
Zones are congurable on the arming mode page.
●
Smoke detector zone and gas detector zone will be triggered even if they are disabled.
7.1.3 Password Sengs
Modify Admin Password
You can reset admin password via reserved email or security quesons.
If you only set the email address or security quesons, the admin password can be reset via the
method you choose by default.
If you set both the email address and security quesons, you can choose either method to reset
the admin password.
Change by Email
You can change admin password via email.
Before You Start
●
The
funcon of the device varies according to different models. Refers to the actual device for
detailed informaon.
●
You need to set a reserved email address at the wizard or tap Sengs → → Conguraon →
→ Security Sengs → Email Address to set or change the reserved email address.
Note
Admin password is required to enter the conguraon page.
Steps
1.
Tap
Sengs → → Conguraon .
2.
Tap Forgot Password at the pop up window.
3.
Change your admin password via reserved email address.
Note
Make sure the device has added to the Hik-Connect account.
1) Download Hik-Connect app.
2) Go to More → Reset Device Password .
3) Scan the QR code on the device and a
vericaon code will be popped up.
4) Enter the vericaon code on the device page.
Video Intercom Kit User Manual
34