HIKVISION DS-KH6320-WTDE1 - Page 43

Figure 7-18 Zone Sengs
2.
Press a zone to pop up the zone eding dialogue box.
3.
Set the zone type, alarm type, status of arming status, entering delay, and exing delay.
4.
Tap OK to save the
sengs.
Note
●
2 zone types are selectable: Smoke Detector and Gas Detector.
●
For Gas Detector and Smoke Detector, the alarm type is set as default 24h alarm. The alarm
type of them can not be changed.
Arming Mode Sengs
4 arming modes can be congured: stay mode, away mode, sleeping mode and custom mode.
Before You Start
Tap Sengs → → Shortcut Sengs to enable Alarm.
Steps
Note
On the home page, the arming status funcon and zone sengs funcon are hidden by default.
You should enable the alarm funcon rst.
1.
Back to the home page, tap Sengs → → Scene Sengs to enter the arming mode sengs
page.
Video Intercom Kit User Manual
33