Duress Code
When you are hijacked and forced to open the door, you can enter the duress code. An alarm
will be triggered to nofy the management center secretly.
Note
The duress code and the unlock password cannot be the same.
4.
Create a new password and
conrm it.
5.
Tap OK to save the
sengs.
Modify SIP Password
You can change the SIP password.
Steps
1.
Tap Sengs → → Conguraon , and enter admin (acvaon) password.
2.
Tap
→ SIP Sengs to enter the page.
3.
Tap Registraon Password to pop up the SIP registraon password sengs dialog box.
4.
Create a new password and conrm it.
5.
Tap OK to save the sengs.
7.1.4 Synchronize Time
Steps
1.
Tap Sengs → → Time and Date to enter the me synchronizaon page.
2.
Tap Date Format and Time Format to set the
me format.
3.
Oponal: Tap Time to set me manually.
4.
Tap Sync Time.
Video Intercom Kit User Manual
36