HIKVISION DS-KH6320-WTE1 Configuration Guide

Note
Indoor extension does not support the ring duraon sengs, call forwarding sengs, or auto-
answer funcon.
3.6.2 Volume Sengs
Set the microphone volume, prompt sound volume, call volume, and enable touch sound.
Steps
1.
Tap
Sengs → → Volume Sengs to enter the volume sengs page.
2.
Set the microphone volume, prompt sound volume, and the call volume. You can also enable
Touch Sound to turn on the key sound.
3.7 Via the mobile client
The device support adding to Hik-Connect and coguraon remotely via the client.
3.7.1 Link to the Mobile Client
Download and link to the mobile client, and you can congure the parameters of the device
remotely via mobile client.
Steps
1.
Tap
Sengs → → Conguraon and enter the admin (acvaon) password to enter the
sengs page.
2.
Tap
to enter the system maintenance page.
3.
Tap Hik-Connect Service Sengs.
Network Indoor Staon Conguraon Guide
32

HIKVISION DS-KH6320-WTE1 Specifications

General

Display Size	7 inch
Resolution	1024 × 600
Network Protocols	TCP/IP, SIP, RTSP
Audio Input	Built-in omnidirectional microphone
Audio Output	Built-in loudspeaker
Power Consumption	≤ 6 W
Operation Method	Touchscreen
Audio Compression Standard	G.711 U
Audio Compression Rate	64 Kbps
Wi-Fi Standard	IEEE802.11 b/g/n
Wi-Fi Frequency Range	2.4 GHz
RS-485	1
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Audio	Two-way audio
Power Supply	12 VDC, PoE (IEEE802.3af)
Installation	Wall-mounted
Display Type	TFT LCD
Network Interface	10/100 Mbps Ethernet
Alarm Output	1 channel
TF Card	up to 32 GB
Working Humidity	10% to 90%