HIKVISION DS-KH6320-WTE1 Configuration Guide

Chapter 4 Remote Operaon via the Client Soware
The Video Intercom module provides remote control and conguraon on video intercom products
via the iVMS-4200 client
soware.
4.1 Device Management
Device management includes device
acvaon, adding device, eding device, and deleng device,
and so on.
Aer running the iVMS-4200, video intercom devices should be added to the client soware for
remote
conguraon and management.
4.1.1 Add Video Intercom Devices
Steps
Note
●
You can add at most 512 indoor staons and main staons in total to the client, and add at most
16 door staons to the client.
●
For video intercom devices, you are required to create the password to acvate them before
they can be added to the
soware and work properly.
●
You can add online video intercom devices, and add them manually. Here take adding online
video intercom devices as example.
1.
Click Maintenance and Management → Device Management to enter the device management
page.
2.
Click the Device tap.
3.
Click Add to add the device to the client.
Network Indoor Staon Conguraon Guide
41

HIKVISION DS-KH6320-WTE1 Specifications

General

Display Size	7 inch
Resolution	1024 × 600
Network Protocols	TCP/IP, SIP, RTSP
Audio Input	Built-in omnidirectional microphone
Audio Output	Built-in loudspeaker
Power Consumption	≤ 6 W
Operation Method	Touchscreen
Audio Compression Standard	G.711 U
Audio Compression Rate	64 Kbps
Wi-Fi Standard	IEEE802.11 b/g/n
Wi-Fi Frequency Range	2.4 GHz
RS-485	1
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Audio	Two-way audio
Power Supply	12 VDC, PoE (IEEE802.3af)
Installation	Wall-mounted
Display Type	TFT LCD
Network Interface	10/100 Mbps Ethernet
Alarm Output	1 channel
TF Card	up to 32 GB
Working Humidity	10% to 90%