HIKVISION DS-KH6320-WTE1 Configuration Guide

Note
1 to 32 characters are allowed. Supports uppercase leers, lowercase leers, numerics, and
special characters.
Remain Open
Enable the funcon, the relay remains open.
Disabled the
funcon, and you can set the remain open duraon.
Note
●
By default, the funcon is disabled.
●
1 to 180 s are available to set.
Hide on Main Page
Enable the funcon and the relay buon will be displayed on the main page. You can control
the relay status manually on the main page.
Disabled the
funcon and the relay buon will no be displayed on the main page.
3.10 Device
Informaon
View the device informaon, including the version, model, serial No. and open source disclaimer.
Steps
1.
Tap Sengs → → Device Informaon to enter the Device Informaon page.
2.
View the device version, model, and serial No.
3.
Oponal: Tap Open Source Disclaimer to view the OSS statement.
Network Indoor Staon Conguraon Guide
40

HIKVISION DS-KH6320-WTE1 Specifications

General

Display Size	7 inch
Resolution	1024 × 600
Network Protocols	TCP/IP, SIP, RTSP
Audio Input	Built-in omnidirectional microphone
Audio Output	Built-in loudspeaker
Power Consumption	≤ 6 W
Operation Method	Touchscreen
Audio Compression Standard	G.711 U
Audio Compression Rate	64 Kbps
Wi-Fi Standard	IEEE802.11 b/g/n
Wi-Fi Frequency Range	2.4 GHz
RS-485	1
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Audio	Two-way audio
Power Supply	12 VDC, PoE (IEEE802.3af)
Installation	Wall-mounted
Display Type	TFT LCD
Network Interface	10/100 Mbps Ethernet
Alarm Output	1 channel
TF Card	up to 32 GB
Working Humidity	10% to 90%