HIKVISION DS-KH6320-WTE1 Configuration Guide

Figure 3-39 Restore Page (For DS-KH6320EY-WTE2)
Restore All
Restore all parameters of the indoor staon to factory sengs and the system will reboot
automacally.
Restore Video Intercom System
All devices in the video intercom system (the indoor staon and its linked devices) will be
restored to the factory sengs. And the system will reboot automacally.
Restore Linked Indoor Extension
Restore all parameters of the linked indoor extension to factory sengs and the system will
reboot
automacally.
Restore Linked Door Staon
Restore all parameters of the linked door staon to factory sengs and the system will
reboot automacally.
Restore (For Normal Indoor Staon)
Restore Default Sengs
Tap Restore Default Sengs to restore parameters except network parameters and
acvaon password to factory sengs. And the system will reboot automacally.
Restore All
Tap Restore All to restore all parameters to factory sengs and the system will reboot
automacally.
Network Indoor Staon Conguraon Guide
38

HIKVISION DS-KH6320-WTE1 Specifications

General

Display Size	7 inch
Resolution	1024 × 600
Network Protocols	TCP/IP, SIP, RTSP
Audio Input	Built-in omnidirectional microphone
Audio Output	Built-in loudspeaker
Power Consumption	≤ 6 W
Operation Method	Touchscreen
Audio Compression Standard	G.711 U
Audio Compression Rate	64 Kbps
Wi-Fi Standard	IEEE802.11 b/g/n
Wi-Fi Frequency Range	2.4 GHz
RS-485	1
Working Temperature	-10 °C to 55 °C (14 °F to 131 °F)
Audio	Two-way audio
Power Supply	12 VDC, PoE (IEEE802.3af)
Installation	Wall-mounted
Display Type	TFT LCD
Network Interface	10/100 Mbps Ethernet
Alarm Output	1 channel
TF Card	up to 32 GB
Working Humidity	10% to 90%