HIKVISION DS-KH8520-WTE1 User Manual

Before You Start
Tap Sengs → → Shortcut Sengs to enable Alarm.
Steps
Note
On the home page, the arming status funcon and zone sengs funcon are hidden
by default. You should enable the alarm funcon rst.
1.
Back to the home page, tap
Sengs → → Scene Sengs to enter the arming
mode sengs page.
2.
Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Figure 2-10 Arming Mode Sengs
3.
Arm the selected zone.
Note
•
Zones are congurable on the arming mode page.
•
24H alarm zone including smoke detector zone and gas detector zone will be
triggered even if they are disabled.
•
Arming mode sengs should be congured with the sengs of arming
status on the user page of the device.
2.4 Password Sengs
Video Intercom Indoor Staon Conguraon Guide
12

HIKVISION DS-KH8520-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH8520-WTE1
Category	Intercom System
Language	English