HIKVISION DS-KH8520-WTE1 User Manual

4.
Open the E-mail to get the vericaon code.
5.
Tap Next, and enter the vericaon code from the E-mail.
6.
Tap Next, and create the new password.
Note
The new password is used for admin login, remote SDK login, SSH login, and Web
login.
2.5 Synchronize Time
Steps
1.
Tap
Sengs → → Time and Date to enter the me synchronizaon page.
Figure 2-11 Time Synchronizaon
2.
Tap Date Format and Time Format to set the me format.
3.
Oponal: Tap Time to set me manually.
4.
Tap Sync Time.
1) Enable Enable NTP.
2) Set the synchronizing interval, enter the IP address/domain of NTP server
and port No., and select the
me zone.
Note
•
The default unit of synchronizing interval is minute.
•
The me zone can be congured as well if the NTP is not enabled.
Video Intercom Indoor Staon Conguraon Guide
14

HIKVISION DS-KH8520-WTE1 Specifications

General

Brand	HIKVISION
Model	DS-KH8520-WTE1
Category	Intercom System
Language	English