HIKVISION DS-KH8520-WTE1 - System Configuration; Remote Configuration

3.3 System Conguraon
You can congure the video intercom parameters accordingly.
Steps
1.
Click Maintenance and Management → System
Conguraon → ACS & Video
Intercom to enter the system conguraon page.
2.
Enter the required informaon.
Ringtone
Click ... and select the audio le from the local path for the ringtone of
indoor staon. Oponally, you can click for a tesng of the audio le.
Ringtone Duraon
Enter ringtone duraon, ranging from 15 seconds to 60 seconds.
Max. Speaking Duraon with Indoor Staon
Enter the maximum duraon of speaking with the indoor staon, ranging
from 120 seconds to 600 seconds.
Max. Speaking Duraon with Door Staon
Enter the maximum duraon of speaking with the door staon, ranging from
90 seconds to 120 seconds.
Max. Speaking Duraon with Access Control Device
Enter the maximum
duraon of speaking with the access control device,
ranging from 90 seconds to 120 seconds.
3.
Click Save to enable the sengs.
4.
Oponal: Click Default to restore the default parameters.
3.4 Remote
Conguraon
In the device list area, select a device and click to enter the remote conguraon
page.
3.4.1 System
Click System on the remote conguraon page to display the device informaon:
Device Informaon, General, Time, System Maintenance, User, RS-485, and Security.
Video Intercom Indoor
Staon Conguraon Guide
25