HIKVISION DS-KH8520-WTE1 - Device Information; Output Settings

Unbound EZVIZ Account
Unlink the Hik-Connect account from the plaorm.
Wizard
Tap Wizard and set the language, network, indoor staon type, device No., and
select a device according to the wizard.
Tap Sengs → to enter the preference page.
Shortcut Sengs
Enable call elevator, alarm, call management center, or leave message and the
icon will be displayed on the home page.
Zone
Sengs
Note
Only when enable Alarm in the shortcut sengs, can the Zone Sengs
displayed on the Preference page.
Set the zone parameters. For details, see Zone Sengs.
Scene Sengs
Note
Only when enable Alarm in the shortcut sengs, can the Scene Sengs
displayed on the Preference page.
Set the scene parameters, including the stay mode, the away mode, the sleeping
mode, or customize the scene. For details, see Arming Mode Sengs.
2.10 Device
Informaon
View the device informaon, including the version, model, serial No. and open
source disclaimer.
Steps
1.
Tap Sengs → → Device Informaon to enter the Device Informaon page.
2.
View the device version, module, and serial No.
3.
Oponal: Tap Open Source Disclaimer to view the OSS statement.
2.11 Output
Sengs
Video Intercom Indoor Staon Conguraon Guide
19