HIKVISION DS-KH8520-WTE1 - Page 27

You can set the displayed me and date format, current me. You can also tap
Sync Time and enable NTP to synchronize the device me.
Note
•
Make sure your device is connected with the network or the NTP funcon
will not available.
•
For details, see Synchronize Time.
System Language
Tap System Language to change the system language.
Note
The indoor staon supports 11 languages.
Brightness Adjustment
Tap + or - to adjust the screen brightness.
Clean Screen
Enable Clear Screen and the screen will be locked for 30s. And you can clear the
screen within the
me duraon.
Note
•
Aer enabling Clear Screen funcon, press and hold the Unlock key to exit
the clear screen mode.
•
The device without unlock key will exit the clear screen mode automacally
when the me is out.
TF Card
Tap TF Card to view the TF card and you can also format the TF card.
Tap
Sengs → to enter the advanced sengs page.
Reboot Device
Tap Reboot Device to reboot the system.
Tap Sengs → → Conguraon .
Enter the admin
(acvaon) password and tap OK to enter the local informaon
page.
Tap to enter the system maintenance page.
Upgrade
Tap Upgrade to get the upgrade package online and reboot automacally.
Video Intercom Indoor
Staon Conguraon Guide
18